InspectVision™: a second set of eyes on every report
Your inspector inspects, decides and signs. InspectVision checks the work: every photo, reading and finding is cross-checked against the 233-point X-Point Inspection™ before a report reaches you.
The human comes first. A trained inspector walks your home, measures it with instruments and takes responsibility for every word in the report. InspectVision is the safety net underneath that person, never the person themselves.
InspectVision is being built and validated in DynXGen Lab. Until it runs on every report, each report still goes through a manual, line-by-line checklist review by your inspector, and this page will say when InspectVision is active.
Inspect. Cross-check. Review. Release.
Software checks the record. Your inspector checks the software. You get a report that has been looked at twice.
Inspect
Your inspector works through the 233 X-Point checks, takes photos and records instrument readings: moisture, temperature, levels, radon.
Cross-check
InspectVision compares the record to the checklist: unanswered checks, photo-to-checkpoint mismatches, readings without a location, implausible numbers.
Review
Your inspector goes through every flag: fix it, explain it or dismiss it. Every decision is logged.
Release
The report goes out under the inspector's name, with the insurance-ready summary and a clean flag log on file.
Experts are strongest with a checklist and a second look.
Pilots, surgeons and engineers all work with checklists and cross-checks. Not because they are careless, but because long, detailed work is exactly where good people miss small things.
A home inspection is hours of detailed observation across 233 checkpoints. InspectVision never gets tired at hour four, never rushes before the next appointment and never skips a section. What it cannot do is judge a building, which is why it does not try.
Read the full explanationThe small mistakes that are easy to make and easy to miss.
| What it flags | Example |
|---|---|
| Checkpoint left blank | A check in the roof section was skipped because the hatch was blocked, but no reason was noted. |
| Photo in the wrong place | A photo labelled “north foundation wall” shows a window well. |
| Reading without a location | A moisture reading of 22% is recorded with no room or wall. |
| Inconsistent severity | The same cracked-flashing issue is rated “Monitor” on one roof slope and “Repair” on another. |
| Summary does not match pages | The first page says 7 repair items; the findings list shows 8. |
| Number out of range | A basement humidity of 580% instead of 58%. |
Illustrative examples of the kinds of problems the check is designed to catch.
What InspectVision will never do.
If you are sceptical about AI in a home inspection, good. These are the lines we hold.
It never inspects
Walking the property, using instruments and judging what is safe, urgent or cosmetic is human work, and it stays human.
It never publishes alone
No finding, rating or sentence reaches your report without the inspector's approval.
It never replaces instruments
Moisture meters, thermal cameras and radon monitors measure. InspectVision only checks that the measurements were recorded properly.
It never trains on your data
Business-grade tools only. Your photos and notes are not used to train AI models.
The data comes from instruments, not from AI.
Moisture meters, an infrared camera, a continuous radon monitor, a digital level and a sewer camera produce the readings. InspectVision only makes sure those readings are recorded completely and consistently.
See the equipment in DynXGen LabBuilt in DynXGen Lab
InspectVision is developed in-house and tested against our own inspection records before it touches a client report. What we learn feeds back into the X-Point Inspection™ checklist.
See the 233 checksQuestions people ask
Is AI inspecting my home?
No. A trained human inspector walks your property, uses the instruments, makes every judgement and decides what goes in the report. InspectVision never visits your home and never decides what is or is not a defect.
So what does InspectVision actually do?
After the inspection, it checks the inspector's own record: whether all 233 X-Point checks were answered or marked as not inspected with a reason, whether photos match their checkpoint, whether readings have a location and sensible units, and whether similar findings carry similar severity. It flags what looks missing or inconsistent. The inspector resolves every flag.
Can the AI write findings by itself?
No. Nothing reaches your report that your inspector has not read, edited if needed and approved. Software may suggest wording; a person decides.
What if the AI is wrong?
That is why a person reviews every flag, and why the inspector, not the software, signs the report and answers for it. A flag the inspector disagrees with is dismissed; a flag the inspector agrees with is fixed before you see the report.
Is it perfect?
No process is, human or software. InspectVision exists to reduce the chance that something is missed or mis-stated, not to promise that nothing ever is. That is also why the inspection itself rests on instruments and a documented checklist.
Is my data used to train AI models?
No. We use business-grade tools that do not train on client data, keep inspection photos and notes out of consumer AI tools, and keep your report for you and the people you choose to share it with. See our privacy policy.
Can I opt out?
Yes. Tell us when you book and your report will be checked manually line by line instead, with no change in price.
Why not just trust an experienced inspector?
You should trust an experienced inspector, and you are. But after four hours in a crawlspace and an attic, anyone can skip a field or mislabel a photo. A second check that never gets tired is a safety net under the person you trust, not a replacement.
Prefer to talk it through?
Ask us anything about how we inspect, what we check and how AI is used. You will speak to the inspector, not a call centre.