The problem with long inspections
A thorough home inspection is hours of detailed observation: roof, attic, structure, electrical, plumbing, heating, insulation, interior, exterior, and in Manitoba a long list of local checkpoints for clay soil, sump systems, frost and radon. Our X-Point Inspection™ has 233 of them.
People are excellent at judging what they see. They are less reliable at doing the same careful check for the hundredth time in an afternoon. A skipped field, a photo filed under the wrong heading or a reading with no location are small errors, and they are the ones that can leave a client with a report that does not quite say what happened.
What InspectVision is
InspectVision™ is a review tool developed in DynXGen Lab. It reads the inspector's own record of an inspection and checks it for completeness and consistency before anything is released. In simple terms, it is a proofreader for the inspection, not an inspector.
InspectVision is being built and validated in DynXGen Lab. Until it runs on every report, each report still goes through a manual, line-by-line checklist review by your inspector, and this page will say when InspectVision is active.
What it checks
- Completeness: every checkpoint answered, or marked as not inspected with a reason.
- Evidence: each photo matches the checkpoint it is filed under, and each instrument reading has a location, a unit and a plausible value.
- Consistency: similar issues carry similar severity ratings across the house.
- Report integrity: the summary page agrees with the detailed findings.
What it will never do
It never inspects your home. It never decides whether something is a defect, how urgent it is or what it will cost. It never publishes a finding on its own. It never replaces an instrument. And it never trains on your information.
Judgement stays with the person who has stood in your basement, felt the cold air at the window and measured the moisture in the wall.
Who is responsible
Your inspector is. Every flag InspectVision raises goes to the inspector, who fixes it, explains it or dismisses it. The report goes out under the inspector's name, and the inspector answers your questions afterwards, with no time limit. Software cannot take responsibility for a report, so we do not pretend that it does.
Equipment first, software second
The evidence in a DynXGen report comes from instruments: moisture meters, an infrared camera, a continuous radon monitor, a digital level, a sewer camera and more. InspectVision only checks that the measurements were recorded properly. The data comes from the world, not from an algorithm.
Honest limits
No process is perfect, human or software. InspectVision is built to reduce missed items and mistakes, and it will not catch everything, which is why the inspection itself is documented, instrument-backed and done by a trained person. If a claim sounds like “the AI never misses anything”, be careful of that claim.
Questions to ask any inspector who uses AI
- Does a human inspector inspect, decide and sign every report?
- What exactly does the software do: write, check or both?
- Does any finding reach me without a person approving it?
- Are my photos and notes used to train AI models?
- Can I opt out?
Our answers: yes, check only, no, no, and yes.